Just Blue logo
Just Blue bottles

Just Blue is an environmentally friendly water care system, that can be used in your spa. Just Blue will help you to keep the water in your spa clean in a safe, simple and effective way.With only one weekly treatment Just Blue will help you to prevent calcium deposits in your system.

Moreover, Just Blue will loosen and remove the existing calcium deposits. These calcium deposits are the medium where bacteria and other micro-organisms grow.

The Spaboy or Onzen system will do the rest. It will destroy the bacteria and disinfect the water. With extraordinary results: the water in your spa is not only clean, but also looks crystal clear and feels nice and soft.

Basically its a pH buffer that will help keep the pH in check and leaves a silica like coating to prevent build-up of calcium on your Spaboy electrodes, heater element, etc.

Arctic Spas logo

Usage JustBlue:

Usage instructions

Add JustBlue to supplement your current water maintenance program.

For spas equipped with Onzen, Core Salt, Essential Salt or Classic Salt add JustBlue monthly in accordance with the information given on the chart below.

For spas with traditional sanitization systems add JustBlue weekly.

  1. Shake JustBlue well before use.
  2. Add JustBlue to you spa’s water according to the chart attached.
  3. Turn pumps on high for 2 minutes to circulate the water.

For more information email: justblue@arcticspas.com.

 

Just blue usage table with measurements

** for other brands of spas please contact your local Arctic Spas representative for instructions.

*Please note – This product is only available in North America.

Progressive Filter Guide

Standard Flow Filter vs High Flow Filter

Please refer to the chart below. Based on your Arctic Spa Custom model, which side filters are installed:

STANDARS FLOW FILTER(300/25/15/10 MICRON)PURPLE LABEL
HIGH FLOW FILTER(300/100/50/25)GREEN LABEL
MODELLEFT SIDE
(Label Color)
RIGHT SIDE
(Label Color)
Arctic FoxPurple (Standard)Green (High flow)
CubPurple (Standard)Green (High flow)
YukonPurple (Standard)Green (High flow)
FrontierPurple (Standard)Green (High flow)
KodiakGreen (High flow)Purple (Standard)
KlondikerPurple (Standard)Green (High flow)
SummitPurple (Standard)Green (High flow)
TundraPurple (Standard)Green (High flow)
Summit XLPurple (Standard)Green (High flow)
Arctic OceanPurple (Standard)Green (High flow)

Scan here to view more information about Standard Flow Filters vs High Flow Filters for your Arctic Spa.

Spa Boy & Onzen
Salt System Instructions

  • If checked, use these instructions with your spa.

WEEKLY(Follow either the Spa Boy or the Onzen Instructions)

  •  Spa Boy
    • 1 Check the app on the phone
    • 2 Adjust the pH (If necessary)
      • A. If it is in the yellow high (7.5) – add 1/2 cap and (1-1/2 for All Weather Pools) of Adjust Down
      • B. If the pH is in the red high (7.8 or higher) add 1 cap (3 caps for All Weather Pools) of Adjust Down
OR

 

  • Onzen
    • 1 Test with regular test strips. If the sanitizer on the test strip is below 1, then turn up the duration “od” (“on” number on older spas) by one number. If the sanitizer is above 3, then turn down the duration “od” by one number. You access this by pressing the light button (or the settings button on older spas) for about 5 seconds. Then press it again until you see the od (Onzen Duration). Use the up and down arrows to adjust.
    • 2
      • A. If it is 7.5 – add 1/2 cap of Adjust Down (1-1/2 for Swim Spas)
      • B. If the pH is 7.8 or higher add 1 cap (3 caps for All Weather Pools) of Adjust Down

MONTHLY

  • 1 Add dosage of JustBlue to your spa:
    Spas under 7′Add 80 ml10′ SpasAdd 200 ml
    7′ spasAdd 100 mlAll Weather PoolsAdd 500 ml
    8′ spasAdd 130 ml

QUARTERLY

  • 1 Test with regular test strips. Make sure the readings are close to the app (doesn’t have to be exact) with the Spa Boy only.
  • 2 Test with Salt Test Strips. Make sure to have a salt level of 2500 ppm (about 5-1/2 – 6 on the strip) Add 1/4 of 4.4 lbs bucket (1 bucket for All Weather Pools) of salt to raise about 500 ppm
  • 3 Replace the filters every 3 months,
    2020 Custom Series Progressive filters every 6 months
    (sign up for our auto ship program to get them sent automatically)
  • 4 Clean and protect the spa cover with Luster Tech

YEARLY

  • 1 Drain and refill the Spa & polish the interior with Home Tech Acrylic Polish
  • 2 Replace the Salt Cell
  • 3 Stain the cabinet (cedar spas) or protect with Luster Tech (composite cabinets)
  • 4 Add the correct amount of salt:
  • 7’Spas(1)4.4lb Bucket
    8’Spas(1.5)4.4lb Buckets or (3/4) 10lb Bucket
    10’Spas(2)4.4lb Buckets or (1) 10lb Bucket
    All Weather Pools(6)4.4lb Buckets or (2.5) 10lb Buckets

Mineral Purifier
Instructions

  • If checked, use these instructions with your spa.

AFTER EACH USE

  • 1 Add 1 cap of Refresh (3 caps for All Weather Pools)

WEEKLY

  • 1 Test with regular test strips
  • 2 Adjust the pH
    • A. At 7.5 – add 1/2 cap (1-1/2 for All Weather Pools) of Adjust Down
    • B. At 7.8 or higher – add 1 cap (3caps for All Weather Pools) of Adjust Down
  • 3 Add 1/2 cap of Boost (1-1/2 caps for All Weather Pools)

QUARTERLY

  • 1 Drain and refill the spa
  • 2 Replace the filters (sign up for our auto sign up program to get them sent automatically)
  • 3 Replace the mineral purifier (sign up for our auto sign up program to get them sent automatically)
  • 4 Clean and protect the spa cover with Luster Tech

YEARLY

  • 1 Stain the cabinet (cedar spas) or protect with
    Luster Tech (composite cabinets)
  • 2 Polish the interior with Home Tech Acrylic Polish
arcticspas man and woman drinking champagne in hot tub

What to do if the water is cloudy?

Mineral Purifier System:

  • 1 Check and adjust the pH
  • 2 Add 1/2 cap of Boost (1-1/2 caps for All Weather Pools)

Spa Boy & Onzen/Essentials/Classic Systems:

  • 1 Check and adjust the pH
  • 2 Add 1/ cap of Boost (1-1/2 caps for All Weather Pools)
  • 3 Check and adjust the salt level
  • 4 Check to make sure the Salt Cell status indicator in the app is green (Looks like the battery)